foam rubber
foam rubber
 

Polyurethane

 

 

Polyurethane was invented back in the 1930's. It was not until World War II that polyurethane foams were used as a replacement material for rubber, which was very expensive at that time and not easy to obtain. Many people today still refer to PU as foam rubber. 

 

 

 

 

 

How is PU made?

 

Polyester and Polyether are basically produced the same way, but they are manufactured with different chemicals. Basically a collection of two chemicals and water are mixed together and heated to create liquid Polyurethane. When the ingredients are combined there is a strong chemical reaction where the liquid Polyurethane begins to rise like bread in an oven. In a matter of minutes it reaches its maximum height. The height is not always consistent from one run to the next. When the material cools, it has a raised center that resembles a bun of bread. This is why the bulk material is referred to as a Bun of Urethane foam. Buns are generally poured at least 60' long. The width is commonly 82" and the height can vary from 24" to 48", and sometimes even more! The buns are typically cut to smaller more manageable lengths prior to fabricating. 

 

 

Applications

 

Packaging Foam

 

 

Polyester and Polyether Families

 

Polyurethane foam for packaging purposes is normally a light weight to medium density material with a more than average IFD. This gives you a less expensive and a firmer foam that provides excellent protection for the most fragile items that are packaged. 

 

PU foam is a great material that absorbs shock and compresses quickly to prevent the packaged product from coming to an abrupt stop. This also requires more material and space to slow the products acceleration to prevent any fragile inner components of the package from being damaged. 

 

 

 

Mattress and Bedding Foam

 

Polyether Family 

 

Bedding is the main industry that PU material is used for. There is a wide variety of PU foam, which include multiple combinations of densities and IFD's. This creates many different feels that make the bed comfortable to lay on. 

 

 

 

 

Upholstery Foam

 

Polyether Family

 

Upholstery foam normally has a higher density and a lower IFD which creates a heavier and rubberish feel that makes seats comfortable to sit on. Lowering the density and IFD will create a very soft material which is great for seat backs. It is always nice to lean back into a soft and cushy seat! 

 

 

 

Would you like us to quote an PU project?  Request a Quote!

 

Not the Size You are Looking For?

Not seeing the size you need? No worries, contact us or Request a Quote so that we can custom cut the size you need! 

 

 

 

Contact Information

Address

Technifoam, Inc.

514 Calvary Ave.

Saint Louis, MO 63147

 

Phone

(314) 421-4044

Fax

(314) 421-0419

 

Hours of Operation:

MON-FRI: 7:00 A.M. - 3:30 P.M.

 

Email

 lisan@technifoam.com

 

 

 

Questions?

Do you have more questions? Our Operations Manager,  Lisa Niederbrach would love to help you better understand what we do and how we can meet your needs. We are ready to solve your problems with design.  Call or email Lisa today!

 

Lisa Niederbrach

lisan@technifoam.com

314-421-4044 (Ext. 10)

 

Tweets from Technifoam @TechnifoamSTL
Print Print | Sitemap
© Technifoam, Inc.